"Due to constant changes from manufacturers, limited time offers and financing options, please call (813) 659-1718 or email [email protected] for the best current deals."

2024 Exmark Vertex S 48" (VXS730GKA48400)

$12,393.00

$12,393.00

Key Features

New/Used New
Usage0 Miles
Availability In Stock
LocationChoo Choo Lawn Equipment
Stock # 5284
VIN 417055284
Condition Excellent

Product Features

Description

Features
  • Ultracut Series 4 Deck: This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
  • Design Simplicity: Operating a Vertex mower is easy, thanks to the simple, ergonomic design. Key, choke, throttle, height of cut adjustment...they're all right there. Hop on, and you're ready to go.
  • Operator Comfort: Designed to place the operator in a position of comfortable control. The wide, open platform offers more room for the operator to adjust their stance, while the ergonomic control panel places all vital controls close for easy reach and operation.
  • Cut Quality: All models are equipped with Exmark UltraCut Series 4 side-discharge cutting decks. The decks feature flow-control baffles, anti-scalp rollers, and a rod-style floating deck design for easy deck rake adjustments. The result is a signature cut quality on any turf type.
  • Reduced Maintenance: With no in-season grease points, flat-free semi-pneumatic front caster tires, and maintenance-free sealed bearing cutter housings, Vertex S-Series is designed to minimize in-season maintenance and the downtime that goes with it.
  • Ease Of Service: These units are easy to service thanks to the tools-free access to the engine and hydro drive components. The reliable single-belt drive system is simple and easy to maintain, and Exmark's patented spherical idler bearings require only annual lubrication.
  • Commercial Engine: Choose from a fuel-saving EFI Kohler or carbureted Kawasaki commercial engine. Both engines feature heavy-duty canister-style air filtration systems and pressurized lubrication for maximum durability in daily commercial use.
  • Single-Point Height of Cut: The single-point height of cut makes it easy to accurately set deck height without tools. This enables the operator to quickly change cut height by simply raising and lowering the deck.
Equipment
  • Starter: Electric
  • Steering Control: Twin levers with center fixed reference bar for ease of control forward and reverse
  • Front Caster Tires: 13 x 5.0-6, smooth-tread, semipneumatic tires with tapered roller bearings.
  • Drive Tires: 20x10.0-8 Carlisle Turf Master
  • Parking Brake: Lever-actuated bar brake.
  • Tractor Frame: Welded, heavy-duty 1.5 in. x 2.5 in. tubular steel.
  • Blade Spindles: No maintenance, sealed and nongreasable spindles; 7.75 in. diameter cutter housing with 1.75 in. diameter splined blade driver 1.0 in.-diameter spindle shaft.
  • Cup Holder: Yes
  • Electrical: 12-volt battery with 15-amp alternator.
  • Standard Features: Enhanced Engine Hour Meter
Power Components
  • Transmission Speeds: Infinitely Variable
  • Transmission Brand: Hydro-Gear
  • Engine Brand: Kawasaki
  • Engine Model: FX730V
  • Engine Displacement: 726
  • Transmission: Hydrostatic
  • Speed: Infinitely variable speed selection 0-8.5 mph (x.x kmph) forward, 0-x.x mph (x.x kmph) reverse
  • Engine Series: V-Twin
  • Fuel System: Carbureted
  • Engine Speed: 3,750 rpm
  • Air Filter: Heavy-duty canister air filtration system
  • Fuel Capacity: 8-gallon (xx.x-L), single fuel tank on LH side.
  • Drive Description: Two Hydro-Gear 12 cc pumps powering two Parker 14.5 cubic inch motors.
  • Fuel Type: Gas Carbureted
  • PTO Engagement: Warner 200 ft-lb clutch
  • Drive System: HYDRO
  • Fuel Indicator: Yes - Float Gauge
  • Drive Wheel Release: Allows unit movement without engine running.
  • Deck Lift: Single point HOC; with mechanical lift-assist springs.
  • Carb Compliant: NO
  • Safety Package: Operator Presence Controls (OPC) with safety interlock system indicators
Decks
  • Deck Style: Floating Deck
  • Deck Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
  • Width / Cutting Deck: 48 in.
  • Deck Construction: 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt
  • Cutting Heights: 1.5 in. (3.8 cm) to 5.0 in. (12.7 cm) in 0.25 in. (0.64 cm) increments adjustable from operator's platform.
  • Blade Tip Speed: Approximately 18,500 fpm.
  • Blades: 3 Blades at 16.25 in. Length
Dimensions
  • Width: 60.05
  • Height: 49.2
  • Length: 65.33
  • Curb Weight: 925
Vertex S-Series Accessories
  • Equipment Cover, Large: Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It's constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.
  • Jack Mount Receiver: Safely access the underside of your zero-turn mower's deck. Used with Exmark's Bulldog jack (p/n 127-6666 not included), attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.
  • Turf Striper: Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.
  • Jack: Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).
  • Trash Container: TRASH CONTAINER
  • Accessory Adapter Kit: Adpater for OCD & 3-Bushel Bagger
  • Tire and Wheel Assembly: Tire and Wheel Assembly 20 X 10-8
  • Hydro Maintenance Kit: Kit includes: 3 quarts of Exmark® Premium Hydraulic Oil and 1 Hydro Filter
  • Light Kit, Strobe: Strobe Light Kit
  • Light Kit: Light Kit
  • Accessory Adapter Kit: Adapter for OCD & 3-Bushel Bagger (Series 3)
  • Operator Controlled Discharge Lever, Foot (Requires 142-8181): KIT, OCD PEDAL
  • Operator Controlled Discharge Gate & Cable Assembly: Operator Controlled Discharge Lever (Foot)
  • Operator Controlled Discharge Lever, Hand: KIT, OCD HAND LEVER
  • 3-Bushel Bagger: Lightweight and easy to attach, this 3-bushel grass catcher fits most riders, stand-ons and wide-area walk-behinds. Adapter kit required for select models.
  • Micro-Mulch System: The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

Engine

Engine Manufacturer Kawasaki
Engine Type FX730V
Displacement 726cc

General

Transmission Hydrostatic
Wheel Size 20x10.0-8 Carlisle Turf Master
Fuel Capacity 8 gal. (xx.x L)

Deck

Deck Size 48 in.
Discharge Type Side; Optional: Bag, Mulch

Shopping Tools